Electromagnetic flowmeter is widely used in sewage, fluorine chemical, production water, water industry and medicine, steel and many other aspects. As the principle of the decision it can only be measured conductive liquid. Although it is in terms of reliability and stability than other types of flowmeter much better, but customers in the actual use of the process, or some problems occur, the following electromagnetic flowmeter in the selection and installation of a detailed talk about:
First, and other flowmeter, although the electromagnetic flowmeter its measurement range than the 30: 1, vortex flowmeter and differential pressure flowmeter are higher, but there are restrictions, many customers table, often It is compared with the water meter, that can measure very low flow rate, under normal circumstances, it can only be measured 0.1m / s below this flow rate is difficult to correctly measure the electromagnetic flowmeter. So the initial order of the flow range than to find out. Order can not be ordered according to the original pipe diameter, the best flow according to your actual meter diameter.
Second, and other flow meters, electromagnetic flowmeter before and after the installation of straight pipes also have requirements, but lower than other types of flowmeter requirements, but the most crucial point to meet: that is full of pipe, and then full pipe. Dissatisfied with the case of the tube easily lead to bounce:
Third, and other flow meters, electromagnetic flowmeter also has the protection level, the general one-level protection class IP65, split for the IP68 (for sensors), if the customer installation environment on the instrument requirements, the installation location in the underground yin Wells or other wet places, it is recommended that customers choose split type. So as not to choose the wrong instrument damage.
electromagnetic flow meter manufacturers :http://www.kunlunsensors.com/productpage.php?pid=71
Slurry Flow Meter :https://www.youtube.com/watch?v=AVPFnAjiJnc
Automatic Tank Gauges :http://www.kunlunsensors.com
No comments:
Post a Comment