1. Loosen the three lock screws of the sensor and pull out the detection lever and the detection head as a whole. (Note: the user must not open the probe head and insert the rod connection)
2. Tighten the ball valve with the sealant locking mechanism after wrapping the thread on the upper end of the fitting with hemp lead oil or a PTFE tape.
3. Slowly reinsert the plunger from above and tighten the locknut slightly, press down on the plunger to measure L2 the same size as the record L2, and the installation is complete.
Battery Powered Electromagnetic Flow Meter :http://www.kunlunsensors.com/productpage.php?pid=96
salt water flow meter :https://www.youtube.com/watch?v=biyJ18k-bp0
Automatic Tank Gauges :http://www.kunlunsensors.com
No comments:
Post a Comment