Integrated electromagnetic flowmeter is based on Faraday's law of electromagnetic induction developed to measure the volume of conductive fluid flow. Because of the unique characteristics of the industry has been widely used in a variety of conductive liquid measurement. Mainly used in chemical industry, papermaking, food, textile, metallurgy, environmental protection, water supply and drainage industries, and computer support can achieve system control.
1. Electromagnetic flowmeter has no moving parts, there is no blocking parts, will not cause pressure loss, but also will not cause wear, blockage and other issues.
2. Electromagnetic flowmeter is a volume flow measurement instruments, in the measurement process is not subject to the measured medium temperature, viscosity, density and conductivity (in a certain range) of the impact.
3. Electromagnetic flowmeter range of a wide range of up to 1: 100. In addition, the electromagnetic flowmeter only with the measured medium is proportional to the average flow rate, and axisymmetric flow state (laminar flow or turbulence) has nothing to do.
4. Electromagnetic flowmeter without mechanical inertia, responsive, you can measure instantaneous pulsating flow, and linear, so you can measure the signal directly with the converter linear conversion into standard signal output. LD-T-type can be in situ instructions, LD-type long-distance transmission.
electromagnetic flow meter manufacturers :http://www.kunlunsensors.com/productpage.php?pid=71
sewage flow meter :http://www.kunlunsensors.com/productpage.php?pid=95
Automatic Tank Gauges :http://www.kunlunsensors.com
No comments:
Post a Comment