High Quality Precision Vortex Compress Air Flowmeter

1. 

Special flange and straight pipe welding can not be welded with the sensor.

2. 

Install the sensor so that the flow of signs and fluid flow within the pipeline.

3.

Before installing the sensor, the sealing ring must be put in the flange groove. Pressure and temperature measurement point of the location, take the pressure point in the sensor downstream 3 ~ 5DN, the temperature point in the downstream 5 ~ 8DN Department.

4.

When measuring high-temperature media, do not wrap the sensor connection rods with insulating material.

5.

Shielded cable connecting the sensor to, as far as possible away from the interference of strong electromagnetic field occasions. It is absolutely not allowed to lay together with high-voltage cables. Shielded cables should be shortened as far as possible and can not be coiled to reduce distributed inductance. The maximum length should not exceed 200 meters.

6.

Before installing the sensor, the tubing must be cleaned. Rinse the tube of impurities, to avoid blocking the flow through the sensor. The liquid measuring pipe must be filled with the liquid to be tested to prevent the interference of air bubbles.

steam flow meter :https://www.kunlunsensors.com/newspage.php?nid=167

Vortex Flow Meter Applications :https://www.kunlunsensors.com/productpage.php?pid=97

Vortex Steam Flow Meter :https://www.youtube.com/watch?v=T3LVdtTHnXw